Keyboard Builders' Digest / Projects
Atoll case
A resin printed case designed by u/wthrll for his 40% Atoll PCB.
Published January 24, 2022
Out of 150,000 readers, only 54 make this blog possible. Will you be one of them?
The Atoll is an open-source 40% PCB with a resin printed case.
The result of a foolish PCB-first case-second approach to a hotswap 40% mechanical keyboard. 12.75u width with a split spacebar, HHKB bottom row, and an optional encoder in the top left – wthrll.
The picture above is a render, check the original r/mk post for more pics.
This is the author's first go at printing a case for his Atoll PCB: A 5° typing angle screw-free design that slides together around the plate.
Github repo: https://github.com/wetherall/ATOLL-1.0
Printed on an Anycubic Photon Mono SE using Elegoo ABS-like resin in about 8 hours.
Published on Mon 24th Jan 2022. Featured in KBD #62 (source).
Related
TOTEM
TOTEM is an open-source split keyboard by _GEIST_ sporting SEEED XIAOs.
Levels54
The Levels54, a dual-trackball wireless split keyboard sold by ergokeyboards.com, is now fully open source.
Quefrency Flipper case
u/Phobokin_Chicken designed and printed a Flipper case for the Quefrency Rev 3.
MMOrtho
SKZBadHabit's MMOrtho is a handwired unibody split build with a custom configurator.