Keyboard Builders' Digest
Save $5 at Angry Miao! Code: KBDNEWS
Keyboard Builders' Digest / Tips & Tricks

Sweep case

An open-source 3D-printed case for the Sweep keyboard, designed by Knifa.

KBD.news
Published December 24, 2021
Creators! Feel free to tip me off about your keyboard related projects to bring them to 150,000 readers!

This is a 3D-printed case for the Sweep 2.x by @davidphilipbarr, intended to be printed in a soft TPU. It features cutouts for the switch pins and solder joints so the board can sit completely flush.

The case was built around the Sweep 2.1 specifically, but it may also fit the Sweep 2.

I designed this case to help it sit flush afterwards. […] It's printed in a soft flexible rubber so it also acts as a bit of a cushion – Knifa.

STLs available on Thingiverse: https://www.thingiverse.com/thing:5171857

Do you like this post? Share, donate, subscribe, tip me off!

Published on Fri 24th Dec 2021. Featured in KBD #58 (source).

Related

Froggr

Froggr is the next board in weteor's Orthocade family: a 12u ortholinear keyboard with 48 keys and offset bottom row.

LeBallz

LeBallz is a Le Chiffre variant by Protieusz – with a 25mm trackball and an optional EC11 encoder.

Crkbd magnetic case

This is a 3D printed magnetic case by taksi_kavausuki for Crkbd choc keyboards – with STL file.

3D printed BM43 case

Commercial_Dinner989 has shared his second 3D printed project, a case for a BM43 PCB.

Chocowi36

A 36-key low-profile wireless split by Đức Đào with huge battery: Chocowi36.
×
top