Invyr Holy Panda switch
The Invyr Holy Panda is a tactile mechanical switch with PC top housing, Nylon bottom housing, and stem (standard). It features a stainless steel spring. The actuation occurs at 2mm. The 67g bottom-out occurs at 4mm. Factory lubing? Yes! Manufactured by Invyr.
Where to buy Invyr Holy Panda switches?
Oh no! This item is taking a little vacation. No active offers for Invyr Holy Panda switches at the moment -- stay tuned!Invyr Holy Panda data sheet
| Name | Invyr Holy Panda |
|---|---|
| Type | tactile |
| Footprint | 5-pin |
| Top housing | PC |
| Bottom housing | Nylon |
| Stem | standard |
| Spring | stainless steel |
| Tactile force | - g |
| Actuation | - g |
| Bottom-out | 67 g |
| Tactile bump position | - mm |
| Pre-travel | 2 mm |
| Total travel | 4 mm |
| Lube | Factory lubing? Yes! |
| Designer | unknown |
| Manufacturer | Invyr |
Invyr Holy Panda sound test
Comments on Invyr Holy Panda switches
The Invyr Holy Panda is an in-stock version of a community driven frankenswitch that was created by Quakemz. The Invyr Holy Panda is made by combining the housing and spring of an Invyr Panda linear switch and a stem of a Halo True tactile or Halo Clear tactile switch – LumeKeebs.
Invyr Holy Panda alternatives
Here are some notable alternatives to the Invyr Holy Panda, our reference switch. Competitors with comparable specs across parameters like switch type, housing material, actuation and bottom-out forces and travel distances — even color. Not perfect matches but the closest results in order of similarity.
| Sim. | Similar switches | Comparison | ||
|---|---|---|---|---|
| 92% | DK Creamery - Birthday Cake tactile, 5-pin, PC/Nylon/POM, 0/63.5gF, 0.0/4.0mm | Compare | ||
| 91% | HMX Snowfall tactile, 5-pin, PC/Nylon/POM, 0/50gF, 2.0/3.0mm | Compare | ||
| 90% | Aflion Thunder Shadow tactile, 5-pin, PC/Nylon/POM, 0/63.5gF, 2.0/3.5mm | Compare | ||
| 89% | Gateron Weightlessness tactile, 5-pin, Nylon/Nylon/POM, 0/50gF, 2.0/3.4mm | Compare | ||
| 88% | BSUN Ocean tactile, 5-pin, PC/Nylon/LY, 40/57gF, 2.0/3.3mm | Compare | ||
| 88% | MMD Holy Panda V3 tactile, 5-pin, PC/Nylon/POM, 45/60gF, 2.2/3.2mm | Compare | ||
| 88% | Gateron Baby Kangaroo (V2) tactile, 5-pin, PC/Nylon/POM, 59/67gF, 2.0/3.4mm | Compare | ||
| 87% | Gateron Jupiter Banana tactile, 5-pin, PC/Nylon/POM, 59/69gF, 2.0/3.4mm | Compare | ||
| 87% | Kinetic Labs Salmon tactile, 5-pin, PC Polymer mix/PC Polymer mix/POM, 0/63.5gF, 2.0/3.5mm | Compare | ||
| 87% | DK Creamery - Red Velvet tactile, 5-pin, PC/Nylon/POM, 0/63.5gF, 0.0/4.0mm | Compare | ||
| 87% | CMM.Studio X Gateron Limbo tactile, 5-pin, PC/Nylon PA66/POM, 0/63.5gF, 1.5/3.5mm | Compare | ||
To recap: we were looking for tactile mechanical switches possibly with PC top housing, Nylon bottom housing, and stem (standard). The actuation occuring at 2mm. The 67g bottom-out being at around 4mm. Factory lubing? Yes! — similar to the Invyr Holy Panda.