The Wingtree Nezuko and KTT Strawberry V2 switches are both standard MX mechanical switches of the linear breed. They both feature POM stem material, standard stem shape, 4 mm total travel, however, they come with different top housing (PA66+10% fibre glass vs PC), bottom housing (PA66+10% fibre glass vs PC), spring (20 mm single-stage extended KOS vs gold-plated), actuation (42 g vs 43 g), bottom-out force (55 g vs 62 g), pre-travel (1.80 mm vs 1.90 mm). That said, they are not too similar. Let's check out this side-by-side specs rundawn with details, availability -- and even current prices -- to figure out which one fits you the best!
The Wingtree Nezuko is a linear standard MX mechanical switch with PA66+10% fibre glass top housing, PA66+10% fibre glass bottom housing, and POM stem (standard shape). It features a 20 mm single-stage extended KOS spring. The 42g actuation occurs at 1.80mm. The 55g bottom-out occurs at 4mm. Factory lubing? Yes! Designed by Xida Studio. Manufactured by Wingtree. | The KTT Strawberry V2 is a linear standard MX mechanical switch with PC top housing, PC bottom housing, and POM stem (standard shape). It features a gold-plated spring. The 43g actuation occurs at 1.90mm. The 62g bottom-out occurs at 4mm. Factory lubing? Yes! Manufactured by KTT. |
|
|
| Name | Wingtree Nezuko | KTT Strawberry V2 |
|---|---|---|
| Type | linear | linear |
| Footprint | 5-pin | 5-pin |
| Top housing | PA66+10% fibre glass | PC |
| Bottom housing | PA66+10% fibre glass | PC |
| Stem material | POM | POM |
| Stem shape | standard | standard |
| Spring | 20 mm single-stage extended KOS | gold-plated |
| Actuation | 42 g | 43 g |
| Bottom-out | 55 g | 62 g |
| Pre-travel | 1.80 mm | 1.90 mm |
| Total travel | 4 mm | 4 mm |
| Lube | Factory lubing? Yes! Stem legs and stem sliders are covered with a very thin coat of 205g0. The spring and leaf are lubed with dry film. Everything else is dry. There is no lube in the bottom housing or anywhere near the stem pole. The chance that these get lube pooling issue is very small. | Factory lubing? Yes! lightly pre-lubed from factory |
| Designer | Xida Studio | - |
| Manufacturer | Wingtree | KTT |
By tracking prices and in-stock status of 30+ well-known keyboard stores worldwide, we can state that the Wingtree Nezuko is available at a single shop at the moment, while the KTT Strawberry V2 can be found in multiple stores.
Clicking the links below take you to some notable keyboard shops offering Wingtree Nezuko and KTT Strawberry V2 switches. When accepted, the prices indicated already include the discount - use the KBDNEWS coupon code at checkout to claim your saving!
Prices, discounts, and stock status are checked regularly; however, changes since the last update cannot be ruled out. Everything here is for informational purposes only. Check the product pages for the latest prices!
Comments on Wingtree Nezuko switches | Comments on KTT Strawberry V2 switches |
The WingTree Nezuko linear switch is a full-travel, long-pole linear switch designed by Xida Studio and manufactured by Wingtree. Nezuko features Wingtree's latest optimized textured mold, delivering a stronger, more consistent scratchy typing experience than previous generations. The combination of a PA66 fiberglass-reinforced housing and POM stem creates a dense yet refined scratch profile that feels crisp, responsive, and highly textured without being rough or unpleasant. On the acoustic side, Nezuko produces a bright and clean sandy sound signature with prominent scratch throughout the keypress. The bottom-out is crisp, concentrated, and rich in mid-to-high pitch sound. Each switch is available in both factory-lubed and dry configurations. The factory-lubed version offers improved smoothness and consistency, while the dry version only comes with a factory-lubed spring and leaf, preserving the maximum amount of scratch and sandy feedback for enthusiasts seeking the strongest texture possible. FYI: Wingtree's 4.0 full-travel textured mold used in Nezuko will remain exclusive throughout 2026 and will not be made available to new studios – Unikeys. | What's new with V2? The biggest change in V2 has been the reduction in the number of runners in the injection molding process. Previously in V1 there were 24 runners. In V2 there are now only 16 runners. For those unfamiliar with injection molding, a runner is a channel cut into the mold that allows for the plastic to flow from the nozzle into each cavity. Decreasing the number of runners and cavities allows for better control and consistency resulting in better tolerances and smoothness. Additionally, new molds are generally smoother than older molds due to pristine internal surfaces – dangkeebs. Recommended for deep sounding, thocky builds – beaverkeys. Strawberry V2's are a sweet premium linear inspired by bright berries. They're composed of a clear top housing, transperant pink bottom housing, and pink POM stem allowing for improved RGB transmittance. Additionally, the switches are lightly pre-lubed with an improved factory lubing technique to ensure they're ready to go as soon as they arrive! – dangkeebs. |
