Keyboard Builders' Digest / Tips & Tricks

Gasket mount Draculad case

A custom gasked mount Draculad case shared by chewiedies.

KBD.news
Published March 27, 2023

This is a high profile gasket mount case for the Draculad designed by chewiedies. It fastens with 6mm x 3mm magnets and supports optional tenting. The bottom of the base is cut out and will fit a light diffuser for underglow.

If you have already built your Draculad you may not be able to use this case as it's a solder-only kit – chewiedies.

So you have to solder the switches to the PCB in order to be able to use this case.

Resources

• https://www.printables.com/model/431623-draculad-gasket-mount-case

Published on Mon 27th Mar 2023. Featured in KBD #117 (source).

Related

Flynn

A handwired low-pro unibody keyboard by Joshua Chung: Flynn.

Ground Control 40

Nick Coughlin's Ground Control 40 is a 40% open-source ortho keyboard designed for rapid prototyping.

HaloPad V2

A 3D printable enclosure for the Adafruit Macropad PCB – designed by Kronocide, inspired by the Nuphy Halo 96 keyboard.

Tiwaz

Timo's Tiwaz is an ortho split gaming keyboard with joysticks and gaskets.

Got Milk?

Got Milk? - an artistic 3D printed case/plate test run by u/QDP2D.