Keyboard Builders' Digest
Save 5% at Divinikey! Code: KBDNEWS
Keyboard Builders' Digest / Projects

Rev-lp

The revxlp by Cyril279 was inspired by the Reviung series, but it is designed for Choc switches.

KBD.news
Published December 5, 2022
54 people keep this blog alive for 150,000 readers. Want to join? Thanks to: Benjamin Bell, Micah Alpern, and Christian Mladenov.

The revlp or Rev-lp is not new, it was published almost a year and a half ago. However, referenced by Pete Johanson's revxpl, I wanted to post about it for the sake of completeness.

Designed by cyril279, the revlp is based on the Reviung41/39 by gtips, but supports v1 and v2 Kailh choc switches (pg1350 & pg1353), and comes in three flavors:

  • 39_1350: 39-key Reviung, 18x17mm spacing, v1 switches; hotswap, single-color backlit
  • 41_1350: 41-key Reviung, 18x17mm spacing, v1 switches; hotswap, single-color backlit
  • 41_1353: 41-key Reviung, 19mm square spacing, v2 (& v1) switches; soldered switches, no lighting

Resources

Do you like this post? Share, donate, subscribe, tip me off!

Published on Mon 5th Dec 2022. Featured in KBD #106.

Related

VColChoc44

The VColChoc44 is an Atreus-like low-profile monoblock split by jpconstantineau with on-board RP2040.

Unibody Ximi

Sadek Baroudi turned the Ximi into a unibody split by designing a new tented case.

JESK56

T. G. Marbach's JESK56 is a diodeless 56-key ortholinear keyboard, using a single RP2040-based microcontroller thanks to some fancy math and graph theory.

Wireless Atreus Choc

An open-source Atreus choc board by LevitatingPineapple with Nice!Nano controller.

Yamada Willow

Daraku-Neko's Yamada Willow is a monoblock split with the Willow layout and an ambidextrous numpad.
×
top